Shop Options:

Model 71 Slab Tong

Price: $2,281.00
Add to Cart Go to Cart Continue Shopping
Model Number: 71-4

1500 lb capacity

*Images may or may not be your exact model. Images are for reference only.

LIFTING TONGS

MODEL ST - SLAB TONGS
PRODUCT FEATURES:
Designed for lifting dry slabs of concrete, stone,
    or metal that must be protected from scratching
    or marring.
Used in construction work to position slabs.
The curved pads give proper contact for gripping
    smooth surfaces and handling a large range of sizes.
Polyurethane gripping surfaces are standard.
A manual latch is standard and locks the tong arms
    for easy placement on the load.
Complies with ASME standards.
model st slab tons
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.
PRICING AND SPECIFICATIONS
Model
No.		 Rated Cap.
in Lbs.		 Load
Width (in.)		 HR Headroom
(in.) Min. - Max.		 Weight
Lbs.		 Price
1,000
1 to 6
31.30 - 39.58
 65
$1,395
1,000 6 to 10 35.06 - 43.00 75
$1,521
1,500 8 to 12 29.18 - 38.06 85
$1,649
1,500 10 to 14 31.43 - 42.00 145
$1,852
1,500 14 to 18 41.38 - 51.25 145
$2,281
1,500 18 to 22 48.90 - 60.00 150
$2,533
GENERAL INFORMATION:
lifting tongs Lifting Tongs are designed and manufactured to customer
load specifications. Optional is an automatic latching device.
All Lifting Tongs are designed and manufactured to
conform with ASME B30.20 standards.
Lifting tongs are available in three configurations.
gripping tongs
1. GRIPPING - Grab arms conform to load surface with outside
    diameter supported below center of load for additional holding
    advantage.
Designed to lift such products as rolls, tubes, and other
cylindrical materials.
lifting tongs with grip pads
2. PRESSURE - Grab arms grip vertical sides of straight sided
    materials. Custom grip pads are required to have sufficient
    coefficient of friction between material lifted and grip pads. Grip
    pads may be rubber, steel, belting, points and other.
Designed to lift such products as bales, boxes, ingots, and
other straight sided materials.
Standard tongs for bales and slabs are shown above and also
see Model 77 - Bale Lifting Tongs section.
lifting tongs for boxes
3. SUPPORTING - Grab arms have feet to support underneath load.
    Designed to handle constant sizes of material to maintain a
    horizontal plane on the lifting feel. Dunage under material required
    to insert/remove feet of tong.
Designed to lift constant sized boxes, containers, crates, and
other constant sized square shaped material.
Standard Tongs for dies see Model 70 - Die Lifting Tongs section.
Application Ideas for Gripping Tongs...
to lift rolls, tubes, and cylindrical materials
lifting tongs for cylindrical objects
This GRIPPING TONG is used to lift cylindrical objects
such as large diameter round bar, tube or rolls of material.
We have integrated both a manual latch or the autolatch
mechanism into this family of tongs. The selection of the
latch is dependent on the application.
lifting tongs to handle longer loads
This GRIPPING TONG is designed to handle longer loads
and loads that may be more susceptible to damage. The
longer contoured pads used on the tong arms even the
pressure on the lifted item. This would be useful when lifting
rolls of fabric or polyethylene film. The pads could be lined
with a material such as nylon or rubber and used to lift brass
bar or machined parts without the potential for damage that
may occur if using slings or forklifts.
lifting tongs for long round shapes
This GRIPPING TONG is designed to pick up long lengths
of round bar or bundles of steel that are approximately
round in shape. The narrow gripping arm will engage the
lifted item with significant pressure.
Applications Ideas for Pressure Tongs...
to lift bales, boxes, ingots, and other straight sided materials
barrier tongs
PRESSURE TONGS can be used to lift objects that have
sufficient structure and density that they will not be damaged
by the application of significant lateral force. An example of
this is the concrete highway barriers and steel ingots.		 lifting tongs for steel

They can also be used in situations where the lifted item can
accommodate a gripping action that may indent the sides of the
load. Cotton and cardboard bales are a good example of loads
that can be lifted with a PRESSURE TONG even though they
are not rigid.
pressure tongs
Custom Pads available
Rubber
Steel
Belting
Points
Special materials
Lifting Tong, Lifting Tongs, Slab Tong, Slab Tongs, Concrete Tongs, Glass Tongs, and Stone Tongs from your complete source for
material handling equipment.